Envoy 2WD V6-4.3L VIN W (1998)
Wiper Gear Box: Service and Repair
REMOVAL PROCEDURE
Tools Required
J 39232 Wiper Transmission Separator
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the wiper arm assemblies.
3. Remove the air inlet grille panel.
4. Remove the screws retaining the transmission to the vehicle.
5. Using the J 39232, unseat the transmission assembly from the wiper motor crank arm.
6. Remove the transmission assembly through the access openings in the top of the cowl.
INSTALLATION PROCEDURE
Tools Required
J 39529 Wiper Linkage Installer
1. Install the transmission assembly to the vehicle.
2. Install the screws that retain the transmission assembly to the vehicle.
