Envoy 2WD V8-5.3L (2007)
3. Adjust the parking brake to the full-up, or fully engaged position.
4. Connect the electrical connectors, as necessary.
5. Lower the rear of the console and slide the console forward into position.
6. Ensure that the 2 retaining ears on the front extensions of the console are fully engaged to the lower I/P, Buick only.
Notice: Refer to Fastener Notice.
7. Install the center console retaining screws.
Tighten the screws to 2.5 N.m (22 lb in).
8. Install the console storage compartment.
9. Install the center console shift lever bezel, Buick only.
10. Install the floor shift control knob.
11. Install the rubber ash tray inserts and rubber mat to the console.
12. Remove the blocks from the vehicle.
