gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Console Replacement|Page 17492 > < Console Replacement|Page 17490
Page 6
background image

1. Remove the dome lamp lenses by gently prying the lenses from the console.
2. Remove the 2 screws that retain the console to the roof panel. 
3. Release the front retaining tabs. 
4. Lower the console and disconnect the electrical connectors as needed. 
5. Remove the console from the vehicle 
6. If replacing the console, remove the garage door opener if equipped. 
7. If replacing the console, remove the OnStar(R) microphone if equipped. 
8. If replacing the console, remove the power sunroof switch if equipped. R
9. If replacing the console, remove the noise cancellation microphone if equipped. 

Installation Procedure

1. If replacing the console, install the noise cancellation microphone if equipped. 
2. If replacing the console, install the power sunroof switch if equipped. 
3. If replacing the console, install the OnStar(R) microphone if equipped.
4. If replacing the console, install the garage door opener if equipped. 

5. Position the console to the roof panel. 
6. Connect the electrical connectors as needed. 
7. Seat the front retaining tabs. 

Notice: Refer to Fastener Notice.

8. Install the 2 screws retaining the console to the roof panel. 

Tighten the screws to 1.2 N.m (10 lb in).

9. Install the dome lamp lenses.

Roof Console Retainer Replacement

Roof Console Retainer Replacement

Removal Procedure

1. Lower the headliner.

Console Replacement|Page 17492 > < Console Replacement|Page 17490