Envoy 2WD V8-5.3L (2007)
Sunroof / Moonroof Panel: Service and Repair
Sunroof Window Replacement
SUNROOF WINDOW REPLACEMENT
REMOVAL PROCEDURE
1. IMPORTANT: The sunroof must be in the fully closed position prior to removing the sunroof window.
Open the sunshade panel.
2. Remove the 4 screws (2) that retain the sunroof window (1) to the sunroof module assembly.
3. Remove the sunroof window from the top of the vehicle.
INSTALLATION PROCEDURE
1. Position the sunroof window (1) to the vehicle.
2. Loosely insert the screws (2) that retain the sunroof window (1) to the sunroof module assembly.
3. NOTE: Refer to Fastener Notice
Adjust the sunroof window height so that the window is flush with the roof panel.
Tighten the screws to 3 N.m (27 lb in).
