Envoy 2WD V8-5.3L (2007)
1. Install the guides to the seat back frame, verifying that the lower retainers are fully seated to the frame.
2. Install the guide with the locking tab (1) on the seat's right-hand side.
3. Install the seat back cover and pad.
4. Install the front seat head restraint.
5. Install the seat assembly.
Rear Seat Head Restraint Replacement
Rear Seat Head Restraint Replacement
Removal Procedure
1. Raise the head restraint to the full up position.
2. Adjust the seat cushion just below the top of the seat back in order to gain access to the retaining clip on each head restraint post.
3. Remove the retaining clip from each head restraint post.
4. Remove the head restraint from the seat back.
Installation Procedure
1. Install the retaining clips to the head restraint retractor.