Envoy 2WD V8-5.3L (2007)
Notice: Refer to Fastener Notice.
2. Install the recliner handle.
Tighten the recliner handle screw to 3 N.m (26 lb in).
Front Seat Back Panel Replacement
Front Seat Back Panel Replacement
Removal Procedure
1. Remove the front bucket seat assembly from the vehicle.
2. Remove the front seat back cover and pad.
3. Remove the lumbar cables from the panel clips.
4. Remove the 2 push-pin fasteners (1) from each side of the panel.
5. Remove the push-pin fastener (1) from the bottom of the panel.
