Envoy 2WD V8-5.3L (2007)
4. Release the seat belt bezel from the seat back by pressing in the buttons (1) on the plastic retainers.
5. Remove the seat belt bezel by sliding it off the seat belt.
6. Remove the head restraints.
7. Remove the release latch knob.
8. Remove the screw that retains the seat back latch release bezel to the seat back.
9. Release the J-strips on the bottom of the seat back frame.
10. Release the hook and loop retaining strips at the bottom of the seat back.
11. Remove 3 push-pins from the bottom of the seat back.
Important: Ensure that the hook and loop retaining strips remain attached to the seat back pad.
12. Release the cover from the hook and loop retaining strips on the front of the seat back pad.
