Envoy 2WD V8-5.3L (2007)
Brake Caliper: Service and Repair
Rear Brake Caliper Replacement
Rear Brake Caliper Replacement
Caution: Refer to Brake Dust Caution.
Caution: Refer to Brake Fluid Irritant Caution.
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
3. Remove the rear brake hose bolt from the rear brake caliper.
4. Plug the opening of the brake hose in order to prevent excessive brake fluid loss and contamination.
Important: Discard the copper gaskets. DO NOT reuse the copper, replace them.
5. Remove the copper gaskets from the brake hose bolt.
6. Remove the rear brake caliper mounting bolts.
7. Remove the rear brake caliper from the brake caliper mounting bracket.
Installation Procedure