Envoy 2WD V8-5.3L (2007)
Notice: Refer to Fastener Notice.
5. Install the upper brake caliper mounting bolt.
Tighten the brake caliper bolt to 31 N.m (23 lb ft).
6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
7. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.
8. Fill the brake master cylinder reservoir, if needed. Refer to Master Cylinder Reservoir Filling.
Caution: Refer to Firm Brake Pedal Caution.
9. Pump the brake pedal slowly and firmly in order to seat the brake pads.
10. Burnish the new brake pads. Refer to Brake Pad and Rotor Burnishing.
