Envoy 2WD V8-5.3L (2007)
Important: Ensure that the relationship marks on the brake rotor and the wheel stud are aligned before installing the brake rotor.
1. Install the brake rotor to the wheel hub.
2. Install the brake caliper assembly to the steering knuckle.
Notice: Refer to Fastener Notice.
3. Install the brake caliper mounting bolt.
Tighten the brake caliper bracket mounting bolt to 150 N.m (110 lb ft).
4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.
6. Fill the brake master cylinder to the proper level. Refer to Master Cylinder Reservoir Filling.
Caution: Refer to Firm Brake Pedal Caution.
7. Pump the brake pedal slowly and firmly in order to seat the brake pads.
8. Burnish the replaced or refinished rotors. Refer to Brake Pad and Rotor Burnishing.
Rear Brake Rotor Replacement
Rear Brake Rotor Replacement
Tools Required
^
J 2619-01 Slide Hammer
^
J 42450-A Wheel Hub Resurfacing Kit
^
J 21177-A Drum to Brake Shoe Clearance Gage
^
J-46277 Rotor Removal Tool
Removal Procedure
Caution: Refer to Brake Dust Caution.
