Envoy 2WD V8-5.3L (2007)
Brake Hose/Line: Service and Repair
Front Brake Hose Replacement
Front Brake Hose Replacement
Caution: Refer to Brake Fluid Irritant Caution.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice.
Removal Procedure
1. Remove the brake hose retaining bolt from the frame.
Important: Install a rubber cap or plug the exposed brake pipe fitting ends will prevent brake fluid loss and contamination.
2. Install a rubber cap or plug on the brake pipe fitting.
3. Remove the brake hose bolt from the brake caliper assembly.
4. Remove the brake hose from the vehicle.
Important: The metal gaskets may be stuck to either the brake caliper or the brake hose end. Ensure that these gaskets are removed
from the brake hose end and the brake caliper.
5. Remove and discard the copper gaskets.
Installation Procedure