Envoy 2WD V8-5.3L (2007)
Brake Hose/Line: Service and Repair
Rear Brake Hose Replacement
Rear Brake Hose Replacement
Caution: Refer to Brake Fluid Irritant Caution.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice.
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
3. Clean the all dirt and foreign material from the brake hose and brake pipe fittings.
4. Using a backup wrench, remove the rear brake hose from the brake pipe.
Important: Installing a rubber plug and/or cap fitting to the exposed brake pipe fitting ends will prevent brake fluid loss and
contamination.
5. Install the rubber plug and/or cap on the rear brake pipe fitting.
6. Remove the brake line retaining bolt at the frame.
