Envoy 2WD V8-5.3L (2007)
Drive Belt: Service and Repair
Drive Belt Replacement - Accessory
Drive Belt Replacement - Accessory
Removal Procedure
1. Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement.
2. Install a breaker bar with hex-head socket to the drive belt tensioner bolt.
3. Rotate the drive belt tensioner clockwise in order to relieve tension on the belt.
4. Remove the belt from the generator pulley.
5. Slowly release the tension on the drive belt tensioner.
6. Remove the breaker bar and socket and from the drive belt tensioner bolt.
7. Remove the belt from the remaining pulleys.
8. Clean and inspect the belt surfaces of all the pulleys.
Installation Procedure
