Envoy 2WD V8-5.3L (2007)
3. Install the engine mount to engine.
Tighten the engine mount bolts to 50 N.m (37 lb ft).
4. Install the engine mount frame bracket to the frame.
5. Install the engine mount frame bracket retaining bolts.
Tighten the bolts to 100 N.m (74 lb ft).
6. Shift engine back to the right side of the frame.
7. Install the left side engine mount frame bracket.
8. Install the retaining bolts to the left side of the engine mount frame bracket.
Tighten the bolts to 100 N.m (74 lb ft).
9. Lower the engine, aligning the engine mount studs with the holes in the frame bracket.
10. Remove the pole jack and the block of wood.
