Envoy 2WD V8-5.3L (2007)
Auxiliary Power Outlet: Service and Repair
12-Volt Accessory Power Receptacle Replacement
12-VOLT ACCESSORY POWER RECEPTACLE REPLACEMENT
TOOLS REQUIRED
J 42059Cigar Lighter Socket Remover
REMOVAL PROCEDURE
1. Remove the 12-volt power supply or cigar lighter fuse.
2. Remove the socket by placing one side of the "T" portion of the tool J 42059 into the socket and into the square window tab.
3. Position the opposite "T" portion of the tool into the opposing square window tab.
4. Pull the socket straight out of the retaining ring.
5. Remove the tool from the socket.
6. Disconnect the electrical connector from the socket.
7. Using your finger, remove the socket retaining ring by pulling the retaining ring out of the mounting hole.
INSTALLATION PROCEDURE