Envoy 2WD V8-5.3L (2007)
8. Disconnect the 32-way tan electrical connector (2) from the BCM.
9. Disconnect the 24-way gray electrical connector (1) from the BCM.
10. With an upward motion, remove the BCM (1) from the rear electrical center.
INSTALLATION PROCEDURE
1. Index the slots on the BCM (1) to the rear electrical center.
2. Using a downward motion, install the BCM to the rear electrical center.
3. Connect the 24-way gray electrical connector (1) to the BCM.
4. Connect the 32-way tan electrical connector (2) to the BCM.
5. Connect the 40-way body wiring extension (1) to the BCM.