gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position Sensor > < Engine - MIL ON P0116/P1400 Set In Very Cold Temps|Page 8314

Envoy 2WD V8-5.3L (2007)

Page 2
background image

Notice:  Refer to Fastener Notice.

2.  Install the ECT sensor.

Tighten the sensor to 20 N.m (15 lb ft).

3.  Connect the ECT sensor electrical connector (1).
4.  Refill the engine coolant. Refer to Draining and Filling   Cooling System (LL8) Draining and Filling Cooling System (LH6, LS2).

Crankshaft Position Sensor > < Engine - MIL ON P0116/P1400 Set In Very Cold Temps|Page 8314