Envoy 2WD V8-5.3L (2007)
Seat Belt Buckle: Service and Repair
Front Seat Belt Buckle Replacement
Front Seat Belt Buckle Replacement
Removal Procedure
1. Remove the front seat assembly.
2. Disconnect the seat belt reminder wiring harness (3) on the driver seat.
3. Remove the nut (1) which retains the seat belt buckle to the seat assembly.
4. Remove the seat belt buckle from the seat assembly.
Installation Procedure
1. Install the seat belt buckle to the seat assembly.
Notice: Refer to Fastener Notice.
2. Install the nut (1) which retains the seat belt buckle to the seat assembly.
Tighten the front seat belt buckle nut to 52 N.m (38 lb ft).
3. Connect the seat belt reminder wiring harness (3) on the driver seat.
4. Install the front seat assembly.