Envoy 2WD V8-5.3L (2007)
Seat Belt Retractor: Service and Repair
Seat Belt Retractor Replacement - No. 2 Right Rear
Seat Belt Retractor Replacement - No. 2 Right Rear
Removal Procedure
1. Remove the rear seat belt upper guide shoulder bolt.
2. Remove the right rear quarter trim panel.
3. Remove the rear seat belt lower anchor nut.
4. Remove the bolt that retains the seat belt retractor assembly to the body.
5. Remove the seat belt retractor assembly from the vehicle.
Installation Procedure
1. Install the seat belt retractor assembly to the vehicle.
Notice: Refer to Fastener Notice
2. Install the seat belt retractor assembly to the vehicle.
Tighten the rear seat belt retractor bolts to 70 N.m (52 lb ft).
3. Install the right rear quarter trim panel.
4. Install the rear seat belt lower anchor nut. Ensure that the seat belt webbing is not twisted.
Tighten the rear seat mounting nut to 45 N.m (33 lb ft).
5. Install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten the bolt to 70 N.m (52 lb ft).
