Envoy 2WD V8-5.3L (2007)
Transmission Speed Sensor: Adjustments
Range Selector Lever Cable Adjustment
Adjustment Procedure
1. Ensure that the range selector cable is not restricted.
2. Ensure that the floor shift control is in the PARK position.
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Disconnect the range selector cable (4) from the range selector lever ball stud (6).
5. Ensure that the range selector lever is in the mechanical PARK position. (Rotate the range selector lever fully clockwise.)
6. Release the locking tab (1).
7. Slide the secondary lock cover (1) to the side.