Envoy 2WD V8-5.3L (2007)
6. Remove the negative battery cable ground bolt (7) from the shock tower.
7. Remove the negative battery cable ground terminal (6) from the shock tower.
8. Remove the negative battery cable clip (5) from the shock tower.
9. Remove the negative battery cable terminal bolt (2) from the engine block.
10. Remove the negative battery cable ground (1) from the engine block.
11. Cut the tape wrapped around the conduit and remove the negative battery cable.
Installation Procedure
Important:
*
The negative battery cable must not be connected to the battery prior to the installation of the engine harness ground terminal to the
engine block.
*
The negative battery cable must not be connected to the battery prior to the installation of the instrument panel harness and the engine
harness to the powertrain control module.
