Envoy 2WD V8-5.3L (2007)
7. Install the negative battery cable ground terminal (1) to the left wheelhouse panel. Ensure that the anti-rotation tab (3) is inserted into the hole in
the wheelhouse panel.
8. Install the negative battery cable ground terminal bolt (2) at the left wheelhouse panel.
Tighten the bolt to 10 N.m (89 lb in).
9. Install the battery cable to the battery cable clip attached to the junction block bracket.
10. Connect the engine wiring harness electrical connector to the generator battery control module.
11. Connect the negative battery cable.
