Envoy 2WD V8-5.3L (2007)
Power Steering Line/Hose: Service and Repair
Power Steering Gear Inlet and Outlet Hose Replacement (Except 4.2L)
Tools Required
J 44586 Power Steering Gear Oil Seal Remover/Installer
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Notice: Refer to Power Steering Hose Disconnected Notice.
2. Install the drain pan under the vehicle.
3. Remove power steering hose assembly to power steering gear mounting bolt (2).
4. Disconnect the power steering hose assembly (1) from the power steering gear (3).
5. Disconnect the power steering return hose and power steering cooler hose from the power steering cooler.
6. Lower the vehicle.
