Envoy 2WD V8-5.3L (2007)
Stabilizer Link: Service and Repair
Front Suspension
Stabilizer Shaft Link Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the stabilizer shaft link to stabilizer shaft retaining nut.
3. Remove the stabilizer shaft link to lower control arm retaining nut.
Notice: Do not pry on the stabilizer shaft link. Use care when removing or installing the stabilizer shaft link in order to avoid tearing or puncturing
the stabilizer shaft link boot. Damage to the stabilizer shaft link boot will lead to damage to the stabilizer shaft link.
4. Remove the stabilizer shaft link.
Installation Procedure
1. Install the stabilizer shaft link to the lower control arm.
Notice: Refer to Fastener Notice.
2. Install the stabilizer shaft link to lower control arm retaining nut.
Tighten the nuts to 155 N.m (114 lb ft).
