Envoy 2WD V8-5.3L (2007)
6. Remove the shock module yoke to shock absorber pinch bolt and nut.
7. Spread the shock module yoke at the pinch bolt using a flat-bladed tool.
8. Remove the shock module yoke from the shock absorber.
Installation Procedure
1. Install the shock module yoke to the lower control arm stud and shock absorber.
Notice: Refer to Fastener Notice.
2. Install the shock module yoke to shock absorber pinch bolt and nut.
Tighten the shock module yoke to shock absorber pinch bolt to 70 N.m (52 lb ft).
