Envoy 2WD V8-5.3L (2007)
Use care when handling the coil springs in order to avoid chipping or scratching the coating. Damage to the coating will result in premature failure of the
coil springs.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
Loosen the shock module yoke to lower control arm retaining nut.
Remove the shock module yoke from the lower control arm using J 36607. Pry the yoke away from the control arm to install the J 36607.
Remove the J 36607 and the shock module yoke to lower control arm retaining nut.
Remove the shock module from the shock tower and lower control arm.
Installation Procedure
