Envoy 2WD V8-5.3L (2007)
2. Install the windshield side reveal moldings.
3. NOTE: Refer to Fastener Notice.
Install the windshield side reveal moldings screws.
Tighten the windshield side reveal moldings screws to 2 N.m (18 lb in).
4. Reposition the front door sealing weatherstrips (1) to the pinch-weld flange.
5. Install the push-pin retainers (2) to the front door sealing weatherstrips located at the base of the windshield pillar.
6. Install the cowl air inlet grille panel.
7. Install the windshield wiper arms.
8. Install the antenna mast if equipped.
9. Install the rearview mirror.
10. Close the hood.
11. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
Windshield Side Reveal Molding Replacement
WINDSHIELD SIDE REVEAL MOLDING REPLACEMENT
REMOVAL PROCEDURE
