Envoy 2WD V8-5.3L VIN M (2005)
Skid Plate: Service and Repair
Radiator Support Shield Replacement
Radiator Support Shield Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the radiator support shield mounting nuts and bolts.
3. Remove the radiator support shield.
Installation Procedure
1. Install the radiator support shield.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the radiator support shield mounting nuts and bolts.
Tighten the radiator support shield mounting nuts to 17 N.m (13 lb ft).
3. Lower the vehicle.