Envoy 2WD V8-5.3L VIN M (2005)
8. Pull the sunshade downward while maintaining outboard pressure to the sunshade. You will notice a separation between the headliner and the
sunshade bezel.
9. In order to remove the sunshade from the headliner, carefully grab the headliner at the windshield pillar area and apply downward pressure while
gently rocking the sunshade up and down.
10. Remove the inboard retainer screw.
11. Remove the inboard retainer (1) from the headliner.
12. If the vehicle is equipped with lighted sunshades, perform the following steps:
1. Reach above the headliner to access the electrical connector (1).
2. Remove the electrical connectors from the headliner substrate.
3. Disconnect the sunshade electrical connector from the headliner harness.
13. Remove the sunshade from the vehicle.
Installation Procedure
1. If the vehicle is equipped with lighted sunshades, perform steps 2 through 8:
