Envoy 2WD V8-5.3L VIN M (2005)
1. Raise the mid-gate to the up position.
2. Fold the left rear seat to the cargo position.
3. Pull the rear seat floor stud cover (1) straight up off of the seat rest (2) to disengage the retaining clips.
4. Remove the rear seat floor stud cover from the vehicle
INSTALLATION PROCEDURE
1. Raise the mid-gate to the up position.
2. Install the rear seat floor stud cover (1) to the seat rest (2) by pressing firmly to engage the retaining clips.
3. Unfold the left rear seat to the passenger position.
Garnish Molding Replacement - Body Side Window - Front (TrailBlazer EXT, Envoy XL)
Garnish Molding Replacement - Body Side Window - Front (TrailBlazer EXT, Envoy XL)
Removal Procedure
1. Remove the bolt that retains the seat belt upper anchor to the body.
2. Remove the garnish molding from the vehicle.