Envoy 2WD V8-5.3L VIN M (2005)
1. Install the seat back cushion mounting bolts (2) securing the rear seat back frame to the inboard/outboard rear seat back cushion hinge assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten all rear seat back cushion mounting bolts to 25 N.m (18 lb ft).
2. Install the rear center seat belt retractor assembly, if you are replacing the frame from the left-hand rear seat.
3. Install the seat back panel to the frame with push pins (1).
4. Install the seat back cover and pad to the seat back.
5. Install the inboard/outboard rear seat back cushion hinge covers with the three screws.
Tighten the seat back cushion hinge cover screws to 2 N.m (18 lb in).
