Envoy 2WD V8-5.3L VIN M (2005)
3. Remove the bracket assembly from the seat cushion.
Installation Procedure
1. Position the bracket assembly on the seat cushion.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 2 bolts securing the bracket assembly to the seat cushion.
Tighten the rear seat cushion bracket bolts to 25 N.m (18 lb ft).
3. Install the rear seat cushion assembly in the vehicle.
Seat Cushion Cover and Pad Replacement - Rear No. 1
SEAT CUSHION COVER AND PAD REPLACEMENT - REAR NO. 1
TOOLS REQUIRED
J 36796 Clip Removal Tool
REMOVAL PROCEDURE
1. Remove the seat cushion from the vehicle.
2. Remove the seat cushion bracket.