Envoy 2WD V8-5.3L VIN M (2005)
9. Release the reinforcement bar from the hog-rings.
10. Remove the cover from the cushion.
Installation Procedure
1. Install the cover to the cushion.
2. Install the reinforcement bar to the hog-rings.
3. Attach the retaining strips that retain the cover to the cushion.
4. In order to install the seat cushion to the seat pan, perform the following:
5. Install the seat pan to the cushion and cover assembly.
6. Compress the foam and install the seat cover and cushion to the seat pan.
7. Connect the J-strips that retain the cover to the seat pan.
8. Install the push pins (1) on the underside of the seat bottom.
9. Install the latch bezels.
10. Install the seat cushion bracket.
11. Install the seat cushion in the vehicle.
Seat Cushion Cover and Pad Replacement - Rear No. 2
Seat Cushion Cover and Pad Replacement - Rear No. 2
Removal Procedure
1. Remove the two bolts (2) securing the rear seat cushion assembly (1) to the seat latch rod (3).
