Envoy 2WD V8-5.3L VIN M (2005)
2. Remove the rear seat cushion assembly.
3. Remove the pull handle assembly (1).
4. Remove the J-strips (2) securing the rear seat cushion cover to the seat cushion panel.
5. Remove the seat cushion panel from the pad and cover.
6. Remove the hog rings (1) from the seat cover.
7. Carefully separate the hook and loop fastener strips (2) holding the cover to the pad.
8. Remove the hog rings (1).
Installation Procedure
1. Install the hog rings (1) securing the seat cover to the pad.
2. Pull the cover over the pad pressing the hook and loop fastener strips (2) together.
3. Install the cover flaps to the pad with hog rings (1).
