Envoy 2WD V8-5.3L VIN M (2005)
Steps 1 - 7
Cruise Control - Inoperative/Malfunctioning
CRUISE CONTROL INOPERATIVE/MALFUNCTIONING
DIAGNOSTIC AIDS
-
Inspect for proper operation of the stop lamps.
-
Ensure that the following cruise control switches are not stuck or sticking in the engaged position:
-
Set/Coast
-
Resume/Accel
-
For an intermittent condition, refer to Diagnostic Aids for Circuit Testing and Wiring Repair procedures.
CONDITIONS FOR ENABLING CRUISE CONTROL
-
The vehicle speed is greater than 40 km/h (25 mph).
-
The vehicle is not in PARK, REVERSE, NEUTRAL, or 1st gear.
-
The system voltage is between 12-16 volts.
TEST
