Envoy 2WD V8-5.3L VIN M (2005)
4. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.
IMPORTANT: With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.
5. Remove the right door trim panel.
6. Remove the connector position assurance (CPA) (3) from the side impact sensor yellow 2-way connector (5) located near the middle of the door.
7. Disconnect the side impact sensor yellow 2-way connector (5) located near the middle of the door.
8. Remove the garnish molding.
9. Remove the CPA from the inflatable restraint roof rail module-right yellow 2-way inline connector.
10. Disconnect the inflatable restraint roof rail module - right yellow 2-way inline connector from the vehicle harness connector.
ENABLING PROCEDURE
1. Remove the key from the ignition.
2. Connect the inflatable restraint roof rail module - right yellow 2-way inline connector and install the CPA.
