Envoy 2WD V8-5.3L VIN M (2005)
1. Locate the air flow direction arrow (2) on the MAF/IAT sensor.
2. Install the MAF/IAT sensor on to the air cleaner housing.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Tighten the clamp securing the MAF/IAT sensor to the air cleaner housing.
Tighten the clamp to 7 N.m (62 lb in).
4. Install the air cleaner outlet duct.
5. Install the air cleaner outlet duct bolt.
Tighten the bolt to 10 N.m (89 lb in).
6. Tighten the clamps at the MAF/IAT sensor and the throttle body.
Tighten the clamps to 7 N.m (62 lb in).