Envoy 2WD V8-5.3L VIN M (2005)
Seat Belt Buckle: Service and Repair
Front
SEAT BELT BUCKLE REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the front seat assembly.
2. Disconnect the seat belt reminder wiring harness (3) on the driver's seat.
3. Remove the nut (1) which retains the seat belt buckle to the seat assembly.
4. Remove the seat belt buckle from the seat assembly.
INSTALLATION PROCEDURE
1. Install the seat belt buckle to the seat assembly.
2. Install the nut (1) which retains the seat belt buckle to the seat assembly.
Tighten the front seat belt buckle nut to 52 N.m (38 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Connect the seat belt reminder wiring harness (3) on the driver's seat.
4. Install the front seat assembly.