Envoy 2WD V8-5.3L VIN M (2005)
2. Install the clip(s) that retain the seat belt buckle/anchor plate to the latch bracket.
3. Adjust the left seat back to a cargo position.
4. Adjust the seat filler panel in order to access the center rear seat back bracket/seat belt buckle anchor plate.
5. Install the center seat back/seat belt buckle mounting nut.
Tighten the center rear seat back mounting nut to 45 N.m (33 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
6. Return the seat to an upright position.
Rear (Trailblazer EXT, Envoy XL, Envoy XUV)
SEAT BELT SIDE BUCKLE REPLACEMENT - REAR (TRAILBLAZER EXT, ENVOY XL, ENVOY XUV)
REMOVAL PROCEDURE
1. Remove the 3 screws securing the inboard rear seat back hinge cover.
2. Remove the seat belt side buckle nut (2).
3. Remove the seat belt side buckle (1) from the seat.
INSTALLATION PROCEDURE
1. Install the seat belt side buckle (1) to the seat with the seat belt anchor nut (2).
Tighten the seat belt side buckle nut to 55 N.m (40 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
