Envoy 2WD V8-5.3L VIN M (2005)
1. Install the switch to the bezel. Ensure that the retainers are fully seated.
2. Connect the electrical connector to the window switch.
3. Install the window switch bezel to the door trim panel.
4. Ensure that the window switch bezel retaining clips are fully seated.
Switch Assembly Replacement - Endgate Window, Midgate Window and Rear Moveable Roof -
Overhead Console
SWITCH ASSEMBLY REPLACEMENT - ENDGATE WINDOW, MIDGATE WINDOW AND REAR MOVEABLE ROOF - OVERHEAD
CONSOLE
REMOVAL PROCEDURE
1. Lower the overhead console.
2. Remove the electrical connector from the switch assembly (1).
3. Release the 4 tabs retaining the switch (1) to the console.
4. Remove the switch from the vehicle.