Envoy 2WD V8-5.3L VIN M (2005)
1. Install the power steering cooler to the radiator support.
2. Notice: Refer to Fastener in Service Precautions.
Install the power steering cooler mounting bolts.
Tighten the power steering cooler mounting to 20 Nm(15 ft. lbs.).
3. Connect the power steering cooler hoses to the power steering cooler.
4. Install the front facia.
5. Remove the drain pan from under the vehicle.
6. Lower the vehicle.
7. Start vehicle and inspect power steering fluid level.
8. Add power steering fluid in needed.
