Envoy 2WD V8-5.3L VIN M (2005)
1. Install the inner race (6).
2. Install the upper bearing inner race seat (5).
3. Install the upper bearing spring (4).
4. Important: The electrical contact of the turn signal and multifunction switch assembly must rest on the turn signal cancel cam assembly.
If replacing the turn signal cancel cam (3), lubricate the new turn signal cancel cam with GM P/N 12377900 (Canadian P/N 10953529).Install the
turn signal cancel cam assembly (3).
5. Install the shaft lock (2) or the cam orientation plate (1).
6. Install the new bearing retainer using J23653-SIR and J42137.
7. Remove J23653-SIR and J42137 from the steering shaft.
8. Caution: Refer to SIR Inflator Module Coil Caution in Service Precautions.
Install the Restraint Systems coil.
9. Enable the Restraint Systems. Refer to Restraint Systems Disabling and Enabling Zone 3 in Restraint Systems.
