Envoy 2WD V8-5.3L VIN M (2005)
Transmission Mount: Service and Repair
Transmission Mount Spacer - Replacement
Transmission Mount Spacer - Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the transmission mount.
3. Remove the transmission mount spacer mounting bolts (2).
4. Remove the transmission mount spacer (1).
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the transmission mount spacer (1).
2. Install the transmission mount spacer mounting bolts (2).
Tighten the bolts to 65 Nm (48 ft. lbs.).
3. Install the transmission mount.
4. Lower the vehicle.
