Envoy 2WD V8-5.3L VIN M (2005)
1. Install the outer pinion bearing cup using the J7817, 8.0 inch axle, or the J8611-01, 8.6 inch axle (1), and the J8092 (2).
2. Install the inner pinion bearing cup using the J8608 (2) and the J8092 (1).
3. Determine the selective shim thickness for the pinion.
4. Install the selective shim between the inner pinion bearing and the shoulder on the gear.
5. Install the inner pinion bearing using the J24433.Press the bearing on until the cone seats on the pinion shim.
6. Install a new collapsible spacer.
7. Lubricate the pinion bearings with axle lubricant. Use the proper fluid. Refer to Fluid and Lubricant Recommendations.
8. Install the pinion into the axle housing.
9. Install the outer pinion bearing onto the pinion.
