Envoy 2WD V8-5.3L VIN P (2004)
Antenna Cable: Service and Repair
Antenna Cable Replacement
ANTENNA CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Open the instrument panel (I/P) compartment to a full down position.
2. Disconnect the radio antenna cable (2) from the radio extension cable.
3. Remove the lower rear portion of the wheelhouse panel.
4. Reach up behind the wheelhouse panel and remove the antenna cable and grommet assembly from the cowl opening (1).
5. Pass the end of the radio antenna cable assembly through the cowl opening (1).
