Envoy 2WD V8-5.3L VIN P (2004)
Rear Door Panel: Service and Repair
Panel Replacement
Trim Panel Replacement - Side Rear Door
Tools Required
J 36796 Clip Removal Tool
Removal Procedure
1. Remove the cover from the trim panel.
2. Remove the 2 retaining screws from the trim panel.
3. Remove the power window switch.
4. Use the J 36796 in order to release the fasteners that retain the trim panel to the door.
5. Remove the trim panel from the door.
Installation Procedure
1. Install the trim panel to the door, ensuring that all the retaining tabs are fully seated.
2. Install the power window switch.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 2 retaining screws to the trim panel.
Tighten the screws to 2.5 N.m (22 lb in).
4. Install the cover to the trim panel.
