Envoy 2WD V8-5.3L VIN P (2004)
Cross-Member: Service and Repair
Crossmember Replacement - Rear Steering Gear
Crossmember Replacement - Rear Steering Gear
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the front steering gear crossmember rear mounting bolts.
3. Remove the rear steering gear crossmember mounting bolts.
4. Remove the rear steering gear crossmember from the vehicle.
Installation Procedure
1. Install the rear steering gear crossmember to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the rear steering gear crossmember mounting bolts.
Tighten the rear steering gear crossmember mounting bolts to 50 N.m (37 lb ft).
3. Install the front steering gear crossmember rear mounting bolts.
Tighten the front steering gear crossmember mounting bolts to 50 N.m (37 lb ft).
4. Lower the vehicle.
