Envoy 2WD V8-5.3L VIN P (2004)
Headliner: Service and Repair
Headliner Replacement (Trailblazer, Envoy, Bravada)
Headliner Replacement (TrailBlazer, Envoy, Bravada)
Caution: Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the
material is damaged, replace the headliner and/or the garnish trim. Failure to do so could result in personal injury.
Removal Procedure
1. Ensure the ignition switch is in the LOCK position.
2. Remove the cargo net, if equipped.
3. Remove the luggage/cargo shelf assembly, if equipped.
4. Remove the right sound insulator panel.
5. Remove the front door sill plates.
6. Remove the rear door sill plates.
Notice: Remove the headliner and the headliner harness as an assembly. Do NOT cut or splice the headliner harness. Cutting or splicing the
harness may damage the coax cable, resulting in poor radio performance.
7. Remove the center pillar trim panels.
8. Remove the windshield garnish moldings.
9. Remove the video display, if equipped.
10. If equipped, remove the overhead console.
11. Remove the sunshades from the headliner.
12. If equipped with OnStar(R), perform the following procedure:
1. Disconnect the navigation antenna cable from the communication interface module.
2. Remove the navigation antenna cable from the right side door rocker panel attachments.
3. Remove the navigation antenna cable from the right center pillar.
13. Remove the following headliner harness clips from the left center pillar:
*
The center pillar harness clips (4)
*
The center pillar harness clips (3)
*
The center pillar harness clips (1)
14. Remove the center pillar harness ground bolt (2).
15. Remove the harness from the left center pillar.
