Envoy 2WD V8-5.3L VIN P (2004)
27. If equipped with OnStar(R) perform the following procedure:
1. Install the navigation antenna cable to the right 'C' pillar.
2. Install the navigation antenna cable to the floor studs.
28. Install the body electrical block.
29. Install the rear carpet. Ensure that the carpet hooks over the left wheelhouse panel stud.
30. Connect the electrical connector to the left-hand body side window actuator.
31. Connect the electrical connector to the right-hand body side window actuator.
32. Install the nut (1) securing the stowage jack carrier to the wheelhouse panel.
33. Install the right rear quarter lower trim panel.
34. Install the left rear quarter lower trim panel.
