Envoy 2WD V8-5.3L VIN P (2004)
2. Ensure that the retaining clips are securely installed on the back side of the rear floor trim panel.
3. Install the rear floor trim panel by pressing the retaining clips into the sheet metal openings.
Trim Panel Replacement - Body Lock Pillar Lower (Envoy XUV)
Trim Panel Replacement - Body Lock Pillar Lower (Envoy XUV)
Removal Procedure
1. Remove the rear floor trim cover.
2. Remove the jack stowage cover.
3. Remove the rear door sill plate.
4. Fold the mid-gate to the down position.
5. Pull the trim panel away from the lock pillar to disengage clips.
6. Remove the alignment tabs from the holes in the upper lock pillar trim panel.
7. Remove the lower trim panel from the vehicle
Installation Procedure